![]() ![]() The other will have the MIC OUT cable from the NOMIC and switch it between the two rigs. One switchbox will switch from mic to computer audio, and route the source to the NOMIC. But I'm planning to buy a couple of cheap RS-232 DB-9 switchboxes, and make up a few more cables. The Omni has separate ports so the mic can stay connected. The lack of a mic port on the NOMIC (so you can switch between voice and data easily) is also not a big concern for me. but a simple shielded cable is all you need anyway. The NOMIC does not handle audio from the rig to the soundcard. All I have to do to switch rigs is to unplug one cable and plug in the other. Subsequently, I wired the Omni cable so that it would work with the same internal jumpers. The NOMIC features internal jumpers, and since I configured the K2 cable first, I ensured that the internal jumpers were appropriate for it. If you wanted to hook the NOMIC up to a rig with an RJ-45 mic connector, e.g., Icom IC-706, then you can just spend $6 at the local computer shop for a 6' Ethernet cable and jumper inside accordingly. one with an 8-pin mic connector for the K2 and another with two phone plugs for my Omni VI. I took an extra 6' Ethernet cable (with RJ-45 jacks on each end) and cut it in half. ![]() The NOMIC does not come with a MIC OUT cord (since these vary with your rig), but that is no problem. I also decided that I didn't want an interface with cables permanently attached for portable use. don't have to worry about stepping on this guy out in the field and breaking it. It also is the only small inexpensive interface I know of that is enclosed in a metal box. Why? It doesn't require external power, it supports rig keying via the computer's serial port, and it's extremely small. it must all fit in a small Pelican case!Īfter carefully looking at all of the available rig-to-computer interfaces, I decided on the RigBlaster NOMIC. In order to do so, I am gathering everything needed for remote operations with one important proviso. I operate mainly from my home station, but also plan to take my K2 on vacation, etc., with me and operate in exotic locales. Great for portable ops, great for home station use too ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |